AR-D33 - D Rings 3" x 3"- Non-conductive, smooth bearing surfaces for easy wire management. Designed with two mounting holes per side for several mounting methods. Will not damage conductor insulation.
Part Number: AR-D33


AR-D22 - D Rings 2" x 2"- Non-conductive, smooth bearing surfaces for easy wire management. Designed with two mounting holes per side for several mounting methods. Will not damage conductor insulation.
Part Number: AR-D22


AR-TVBRA2K – Retrofit, 2-gang up, 2-gang down - Arlington’s new non-metallic TV Bridge™ II box kits are the easiest, fastest way to install a flat screen TV. They include two boxes and the necessary connections needed to install the TV and additional components.

Installation is faster because we’ve done the advance assembly work for you! You’ll get a fully assembled, recessed box, with pre-wired receptacle, device, flexible cord and cord grip. All you need to do is cut two openings in the wall, near a power source. There’s no need to cut into your framing members or run power from a panel box. Mounting wing screws hold the boxes secure against the wall. Plugs and connections stay inside the recessed boxes so TV mounts flush against the wall. No mess! – wires stay hidden behind the wall
Part Number: AR-TVBRA2K


AR-LVN2 – 2 gang, new construction - Designed for the installation of LOW VOLTAGE Class 2 wiring, Arlington’s non-metallic Low Voltage Mounting Brackets offer the fast, easy and cost-effective way to install CAT 5, fiber optic, cable TV, and communications cable in new construction. Non-conductive plastic to protect cable from damage. Eliminates pushback. Competitively priced – cost less than plastic or steel mud rings.
Part Number: AR-LVN2


AR-LVN1 – Single gang, new construction - Designed for the installation of LOW VOLTAGE Class 2 wiring, Arlington’s non-metallic Low Voltage Mounting Brackets offer the fast, easy and cost-effective way to install CAT 5, fiber optic, cable TV, and communications cable in new construction. Non-conductive plastic to protect cable from damage. Eliminates pushback. Competitively priced – cost less than plastic or steel mud rings.
Part Number: AR-LVN1


AR-SB130 – Metal stud, cable protectors - These bushings fit existing irregular shaped holes in metal studs, alleviating the need to punch holes in metal studs, weakening the structural member. Use these bushings to comply with paragraph 300-4(b)(1) of the 2008 NEC code which states that: "In both exposed and concealed locations where nonmetallic-sheathed cables pass through either factory or field punched, cut, or drilled slots or holes in metal members, the cable shall be protected by bushings or grommets covering all metal edges and securely fastened in the opening prior to installation of the cable."
Part Number: AR-SB130


AR-SP100 - Nail-up safety plate, 16 gauge steel.
Part Number: AR-SP100


AR-TVBU507 – 3-gang, electrical/AV, retrofit or new construction - Arlington’s recessed TV BOX™ allows you to mount LCD and plasma TVs flush against the wall. Plugs and connectors stay inside this recessed box. Designed for new or old work, TVBU505 is a combo box with power in one side and one low voltage openings for Class 2 wiring. Secure installation and a great finish.

  • No wobble! In retrofit projects, mounting wings hold the box securely against the wall board when screws are tightened. The box mounts directly to a stud for use in new construction. 
  • Adjusts to fit walls from 1/4" to 1-1/2" thick in retrofit applications 
  • Fast, easy installation 
  • Also usable with Arlington’s SCOOP™ series entrance hoods and plates

See product video here.
Part Number: AR-TVBU507


AR-TVBU507 – 3-gang, electrical/AV, retrofit or new construction - Arlington’s recessed TV BOX™ allows you to mount LCD and plasma TVs flush against the wall. Plugs and connectors stay inside this recessed box. Designed for new or old work, TVBU505 is a combo box with power in one side and one low voltage openings for Class 2 wiring. Secure installation and a great finish.

  • No wobble! In retrofit projects, mounting wings hold the box securely against the wall board when screws are tightened. The box mounts directly to a stud for use in new construction. 
  • Adjusts to fit walls from 1/4" to 1-1/2" thick in retrofit applications 
  • Fast, easy installation 
  • Also usable with Arlington’s SCOOP™ series entrance hoods and plates

See product video here.
Part Number: AR-TVBU507BL


AR-TVBU505 – 2-gang, electrical/AV, retrofit or new construction - Arlington’s recessed TV BOX™ allows you to mount LCD and plasma TVs flush against the wall. Plugs and connectors stay inside this recessed box. Designed for new or old work, TVBU505 is a combo box with power in one side and one low voltage openings for Class 2 wiring. Secure installation and a great finish.

  • No wobble! In retrofit projects, mounting wings hold the box securely against the wall board when screws are tightened. The box mounts directly to a stud for use in new construction. 
  • Adjusts to fit walls from 1/4" to 1-1/2" thick in retrofit applications 
  • Fast, easy installation 
  • Also usable with Arlington’s SCOOP™ series entrance hoods and plates

See product video here.
Part Number: AR-TVBU505


AR-TVBU505 – 2-gang, electrical/AV, retrofit or new construction - Arlington’s recessed TV BOX™ allows you to mount LCD and plasma TVs flush against the wall. Plugs and connectors stay inside this recessed box. Designed for new or old work, TVBU505 is a combo box with power in one side and one low voltage openings for Class 2 wiring. Secure installation and a great finish.

  • No wobble! In retrofit projects, mounting wings hold the box securely against the wall board when screws are tightened. The box mounts directly to a stud for use in new construction. 
  • Adjusts to fit walls from 1/4" to 1-1/2" thick in retrofit applications 
  • Fast, easy installation 
  • Also usable with Arlington’s SCOOP™ series entrance hoods and plates

See product video here.
Part Number: AR-TVBU505BL


AR-LV1 - Single Gang, retrofit - Non-metallic, Low Voltage Mounting Brackets are the time- and money-saving solution for faster and easier mounting of Class 2 communications, computer and cable TV wiring. Designed to mount wall plates flush, our mounting brackets have features that deliver a better-looking, easy to install job; specially designed screw holes, thin front lip and more.
  • Brackets adjust to fit various wall board thicknesses 
  • Bracket is its own template for cut out 
  • Horizontal or vertical mounting 
  • They install faster, cost less than metal brackets 
  • UL/CSA Listed

See product video here.
Part Number: AR-LV1


Black low voltage single gang mounting bracket for new construction. 10pcs

Part Number: AR-LVMB1
  • Non-Metallic, black abs plastic
  • Faster and easier mounting of class 2 communications, computer and TV wiring
  • Works with 1/2" and 5/8" drywall
  • Permits use of 3/4" EMT
  • Made of non-conductive, smooth plastic that prevents damage to cable
Weight: 35.8 lbs
Shipping Dimensions: 53"x5.9"x12.6"
Screen Dimensions: 72.3"x41.1"
Overall Dimensions: 80.3"x48.2"
AR-LV2 - 2 Gang, retrofit - Non-metallic, Low Voltage Mounting Brackets are the time- and money-saving solution for faster and easier mounting of Class 2 communications, computer and cable TV wiring. Designed to mount wall plates flush, our mounting brackets have features that deliver a better-looking, easy to install job; specially designed screw holes, thin front lip and more.
  • Brackets adjust to fit various wall board thicknesses 
  • Bracket is its own template for cut out 
  • Horizontal or vertical mounting 
  • They install faster, cost less than metal brackets 
  • UL/CSA Listed

See product video here.
Part Number: AR-LV2


The CED130 Cable Entry Device with Slotted Cover is the newest product in Arlington’s SCOOP™ series of entrance plates and hoods. It provides an aesthetically pleasing installation, while organizing and protecting low voltage cable against abrasion. Mounting holes allow you to attach a decorator-style wall plate to the low voltage side of an electrical box, while providing extra support to the installation. Non-metallic Organizes low voltage cable in a neat bundle
Part Number: AR-CED130


AR-CE1 Single piece - Entrance SCOOP - REVERSIBLE – 2 gang, not only protects cable, but delivers good looks and installation versatility. Use it facing IN – or OUT. It’s easy to install. And, it’s the best way to run A/V cables where you want them.

  • Non-rusting, paintable plastic
  • Versatile, easy to use
  • Install facing in or out

See product video here.
Part Number: AR-CE2


AR-CE1 Single piece - Entrance SCOOP - REVERSIBLE – 2 gang, not only protects cable, but delivers good looks and installation versatility. Use it facing IN – or OUT. It’s easy to install. And, it’s the best way to run A/V cables where you want them.

  • Non-rusting, paintable plastic
  • Versatile, easy to use
  • Install facing in or out

See product video here.
Part Number: AR-CE2BL


AR-CE1 Single piece - Entrance SCOOP - REVERSIBLE – single gang, not only protects cable, but delivers good looks and installation versatility. Use it facing IN – or OUT. It’s easy to install. And, it’s the best way to run A/V cables where you want them.

  • Non-rusting, paintable plastic
  • Versatile, easy to use
  • Install facing in or out

See product video here.
Part Number: AR-CE1


AR-CE1 Single piece - Entrance SCOOP - REVERSIBLE – single gang, not only protects cable, but delivers good looks and installation versatility. Use it facing IN – or OUT. It’s easy to install. And, it’s the best way to run A/V cables where you want them.

  • Non-rusting, paintable plastic
  • Versatile, easy to use
  • Install facing in or out

See product video here.
Part Number: AR-CE1BL


The AR-CED13 accommodates a single or multi-gang decorator-style wall plates. It’s the efficient, simple way to run low voltage cable. Use it by itself – or with our combination power/low voltage recessed boxes.
Part Number: AR-CED13


AR-CED1 Decorator-style SCOOP - REVERSIBLE – For good looks and installation versatility with decorator-style wall plates, non-metallic, entrance hood. It’s the efficient, simple way to run low voltage cable.

Use it by itself – or with combination power/low voltage recessed boxes. White.

See product video here.
Part Number: AR-CED1


The AR-CED13 accommodates a single or multi-gang decorator-style wall plates. It’s the efficient, simple way to run low voltage cable. Use it by itself – or with our combination power/low voltage recessed boxes.
Part Number: AR-CED13BL


AR-CED1 Decorator-style SCOOP - REVERSIBLE – For good looks and installation versatility with decorator-style wall plates, non-metallic, entrance hood. It’s the efficient, simple way to run low voltage cable.

Use it by itself – or with combination power/low voltage recessed boxes. Black.

See product video here.
Part Number: AR-CED1BL