The Hole Pro® line of adjustable hole cutters provides the best quality at a great price that other hole cutter products do not come close to matching. Whatever your customers' hole cutting applications.

Adjustable hole cutters are faster and safer to use, minimize dust and shaving in the work area making for quick cleanup, and can easily be adjusted to make the exact hole size needed for the job. The replaceable blades keep the tool performing "as new" for many years of use.

See how it works here!
Part Number: TL-HLPRO-X305


Features:

  • Faster Cutting
  • No balance bars to change or break
  • Perfect balance
  • Cuts plywood, wood, sheetrock, plaster, MDF, fiberglass, ceiling tiles
  • Cutting thickness - 1 inch (25mm) or 2 inch when can be cut from both sides.
  • Uses 3/8 in shank


Kit Includes:

  • Patented Tri-Slot Shield, slots catch shavings to maintain visibility while cutting; also acts as a portable drill press
  • Hole Cutter
  • Heavy duty carry case
  • Two hex wrenches
  • User replacable blades
The pliers jaws are spring loaded, with a slight needle nose taper. They have both fine flat and circular toothed gripping surfaces. Near the base of the pliers, is a very useful wire cutter, and also a notch near the handle for wire stripping.

You can store the two screwdriver hex bits in the Zilla-Tool's handle reliefs. It also accepts other standard hex bits. To open the knife blade quickly, just press the little "flipper." It also acts as a blade guard when the blade is open.

The custom stainless steel clip will hold the Zilla-Tool in your pocket or on gear, or it can be removed if you want to use the included nylon sheath with belt loop and snap closure. The Zilla-Tool can open bottles too, using the end of its pliers handle.
Part Number: TL-CRKT-Zilla


Dimensions:

  • Open Overall Length 9.625 inches
  • Closed Length 6.5 inches
  • Weight 7.4 ounces

Blade:

  • Length 3 inches
  • Thickness 0.096 inches
  • Material 2CR13
  • Blade-HRC 51-53
  • Finish Black Oxide
  • Grind Hollow
  • Style Modified Spear Point
  • Edge Triple-Point Serrations

Handle:

  • Material Zytel
  • Liner 2CR13

Lock:

  • Type Locking Liner

Carry:

  • Carry System 1 Position Clip and Nylon Sheath

Features:

  • Flipper Yes
  • Flat Blade Driver Yes
  • Phillips Driver Yes


The adjustable wrench jaw opens to 1/2" so you can use it for all kinds of light repair and assembly jobs. Thanks to the carabiner gate, the Guppie is easy to carry on a belt loop, D-ring, pack or rope. (But it is not a weight-bearing carabiner.)

The high-carbon stainless steel blade with a Razor-Sharp edge can be opened and closed with one hand using the blade slot.

The removable bit carrier is also a high-intensity LED light. It has two strong magnets to hold it securely to the Guppie's left side. The stainless steel clip will hold the Guppie in your pocket or on gear, which gives a lot of versatility.
Part Number: TL-CRKT-Guppie

Dimensions:

  • Open Overall Length 5.5 inches
  • Closed Length 3.5 inches
  • Weight 4.1 ounces

Blade:

  • Length 2 inches
  • Thickness 0.104 inches
  • Material 2CR13
  • Blade-HRC 51-53
  • Finish Black Oxide
  • Grind Hollow
  • Style Drop Point
  • Edge Plain

Handle:

  • Material 2CR13

Lock:

  • Type Slip Joint

Carry:

  • Carry System 1 Position Clip

Features:

  • L.E.D. Yes
  • Carabiner Yes
  • Flat Blade Driver Yes
  • Phillips Driver Yes

Makes the Perfect Hands-free, Stationary Work Lamp -- as well as a Handy Ergonomic Flashlight!

  • 15 LEDs on main body -- Mount with magnet or retractable hook to use as a stationary work light.
  • 3 LEDs in front -- Use as powerful hand held flashlight (7-3/4" long).
  • AC and DC Charging Adapters provide over-charge protection.
  • Magnet on back allows mounting on metal surface for use as a stationary work lamp -- you can position work light for best illumination.
  • Retractable hook allows work light to hang for use asa stationary work lamp.
Part Number: TL-Klenk-LEDWork


Telescoping design lets you EXTEND IT, LED flashlight lets you FIND IT, 2 lb capacity magnet lets you GRAB IT!


  • Magnetic pickup tool also functions as a flashlight for illuminating hard to reach areas -- crawl spaces, in and around furnaces and water heaters, and even under the hood!
  • Machined aluminum body has knurled surface for a safe grip and a hex head to keep it from rolling off your work table.
  • Three super bright LED lights burn up to 16 hours on four LR44 batteries (included). For battery replacement instructions, click here.
  • Flashlight extends out to 20" and collapses to 7˝".
  • High-power magnet end has 2 lbs. of pickup power!
  • Flexible 2" long shaft gets into places few other pickup tools can!
Part Number: TL-Klenk-TelFlash


Blades have a tungsten carbide tip for longer life. Suitable for wood, plywood, OSB, fiber-cement board, Hardi board, lathe & plaster, and fiberglass. Used with the X-148, X-200, X-230, X-305, X-425, HHT-200, HT-200 Hole Cutters.
Part Number: TL-HLPRO-BT002


  • Replaces the four most common nut drivers with one tough, yet compact, tool.
  • Telescoping action provides two socket sizes at each end.
  • High-torque grip has textured, non-slip surface.
  • Tough, high quality industrial steel construction.
  • SAE socket sizes are: 1/4", 3/8", 5/16", 7/16
Part Number: TL-KLENK-PKTSCKT


2-in-1 Wire Cutter/Stripper, for electrical wire, 6 inch, Cutting capacity 10 AWG copper wire, Strips 14 - 10 AWG
Part Number: TL-Klenk-Wire-6
  • Cuts wire with one end, grabs and strips wire with the other.
  • No stripping holes -- stripper self-adjusts to wire size.
  • Strips electrical wire sizes 14 to 10 AWG.
  • Cutting head is full-flush cutting and low profile with stainless steel, induction-hardened jaws.
  • Ideal for speaker cables
2-in-1 Wire Cutter/Stripper, for electrical wire, 6 inch Cutting capacity, 10 AWG copper wire, Strips 14 - 10 AWG
Part Number: TL-Klenk-Wire-5
  • Cuts wire with one end, grabs and strips wire with the other.
  • No stripping holes -- stripper self-adjusts to wire size.
  • Strips electrical wire sizes 14 to 10 AWG.
  • Cutting head is full-flush cutting and low profile with stainless steel, induction-hardened jaws.
  • Ideal for speaker cables
Our new Eat'N Tool™ is the brainchild of New York City designer Liong Mah. At first glance it looks like the familiar spoon/fork "spork" combination, but Liong has used his ingenuity and computer-aided design skills to create a lightweight, high-tech outdoor tool.

Yes, there is an ergonomic spoon, and a short-tuned fork. But in addition, there's a handy bottle opener on one side. The right side of the handle is ground to provide an emergency screwdriver blade, which will also work as a pry for opening canisters.

The large central hole is not only designed for finger gripping, but also keeps the Eat'N Tool weight down. Three metric wrench reliefs (10 mm, 8 mm, 6 mm) are useful for emergency repairs, and result in a tool weight of just 1.5 ounces (43 g).
Part Number: TL-CRKT-Spork

Dimensions:

  • Open Overall Length 4 inches
  • Weight 1.5 ounces

Handle:

  • Material 3CR13

Features:

  • Bottle Cap Opener Yes
  • Carabiner Yes
Spudz microfiber lens cloths offer a simple solution to a universal problem; dirt and smudges on smart phones, glasses and other optics. Clean your lenses without damaging or scratching them. This convenient product clips to zippers, key chains, bags, or any number of other locations.

It is washable and reusable making it environmentally friendly. The cleaning cloth stays attached to a neoprene pouch that holds the cloth when not in use. Just tuck the cloth into the pouch when you are finished with it, and clip it where you want it.
Part Number: TL-ALP-Spudz