A professional grade audio power amplifier specifically designed for demanding contractor applications, the CP700 features esoteric grade toroidal power supply and output transformers. These transformers were chosen for their outstanding reliability as well as extended frequency response (-3dB @ 30Hz - 70.7V output through transformer) Now you can have the peace of mind that systems specified with the CP700 will have true transformer output isolation, a feature that previously may have not been affordable due to the cost of quality external transformers.

Owners Manual
Data Sheet
Part Number: A-CP700

Related Items


Features
  • 25V, 70.7V, 100V, and direct coupled (2,4, and 8 Ohm) outputs mounted on barrier strips with
  • covers for safety
  • Balanced inputs on barrier strip and XLR connectors
  • Dual-speed, high efficiency fan cooling
  • Loop through feature on male XLRs, one per channel input
  • Power-up muting
  • Short-circuit, temperature, and DC offset protection
  • Soft clip limiter protection
  • Stepped attenuators mounted on the rear for security
  • Stereo, bridge, or parallel operating modes selectable via rear mounted switch
  • Toroidal output transform

Protection Circuits
  • Output Offset Voltage Protection
  • Heat Sink Overheat Protection
  • Transformer Overheat Protection
  • Load Shorting Protection
  • Power On/Off Protection
  • Soft Clip Limiters
Dimensions: Height: 5.19" (132mm)
Width: 18.9" (480mm)
Depth: 16.85" (428mm)
Direct Power Out: 300 Watts x2 @ 8Ω
400 Watts x2 @ 4Ω
550 Watts x2 @ 2Ω
Bridged Power Out: 850 Watts x2 @ 8Ω
1100 Watts x2 @ 4Ω
Transformer Out: 175 Watts @ 25V
200 Watts @ 70.7V
200 Watts @ 100V
400 Watts @ 140V Bridged
400 Watts @ 200V Bridged
Direct Frequency Response: 30 Hz. - 50 kHz. (+0/-3 dB)
Transformer Frequency Response: 30 Hz. - 16 kHz. (+0/-3 dB)
Sensitivity: <0.05% per channel @ 8Ω, 1kHz, 240 Watts
S/N Ratio: 8Ω per channel @ 240 Watts >100db
Controls: Power Switch, Ch1/Ch2 gain (41 steps), Parallel/Stereo/Bridge Switch
Cooling: Temperature Controlled, dual-speed fans
Indicator LEDs: Power, Protect, Signal, Limit
Weight: 54 lbs (26kg)
A professional grade audio power amplifier specifically designed for demanding contractor applications, the CP400 features esoteric grade toroidal power supply and output transformers. These transformers were chosen for their outstanding reliability as well as extended frequency response (-3dB @ 30Hz - 16kHz via transformer output) Now you can have the peace of mind that systems specified with the CP400 will have true transformer output isolation, a feature that previously may have not been affordable due to the cost of quality external transformers.

Owners Manual
Data Sheet
Part Number: A-CP400

Related Items


Features
  • 25V, 70.7V, 100V, and direct coupled (2,4, and 8 Ohm) outputs mounted on barrier strips with
  • covers for safety
  • Balanced inputs on barrier strip and XLR connectors
  • Dual-speed, high efficiency fan cooling
  • Loop through feature on male XLRs, one per channel input
  • Power-up muting
  • Short-circuit, temperature, and DC offset protection
  • Soft clip limiter protection
  • Stepped attenuators mounted on the rear for security
  • Stereo, bridge, or parallel operating modes selectable via rear mounted switch
  • Toroidal output transform

Protection Circuits
  • Output Offset Voltage Protection
  • Heat Sink Overheat Protection
  • Transformer Overheat Protection
  • Load Shorting Protection
  • Power On/Off Protection
  • Soft Clip Limiters
Dimensions: Height: 5.91"
Width: 19.0"
Depth: 16.85"
Direct Power Out: 160 Watts x2 @ 8Ω
240 Watts x2 @ 4Ω
270 Watts x2 @ 2Ω
Bridged Power Out: 500 Watts x2 @ 8Ω
600 Watts x2 @ 4Ω
Transformer Out: 175 Watts @ 25V
200 Watts @ 70.7V
200 Watts @ 100V
400 Watts @ 140V Bridged
400 Watts @ 200V Bridged
Direct Frequency Response: 30 Hz. - 50 kHz. (+/-3 dB)
Transformer Frequency Response: 30 Hz. - 16 kHz. (+/-3 dB)
Sensitivity: <0.05% per channel @ 8Ω, 1kHz, 240 Watts
S/N Ratio: 8Ω per channel @ 240 Watts >100db
Controls: Power Switch, Ch1/Ch2 gain (41 steps), Parallel/Stereo/Bridge Switch
Cooling: Temperature Controlled dual-speed fans
Indicator LEDs: Power, Protect, Signal, Limit
Idle Power Consumption: 0.41 A, 38 Watts, 130 BTU
Average Power Consumption: 2.4 A, 291 Watts, 992 BTU
Max Power Consumption: 7.3 A, 876 Watts, 2989 BTU
Small and compact, and engineered for efficiency and reliability, the Atlas Sound PA60G amplifier is the perfect choice for paging or background music (BGM) systems, small to medium speech privacy systems, and any applications where distributed audio is required. It provides 60W into a 70.7V/100V line and has a balanced line level input via phoenix connector and a summing unbalanced RCA input. Output is to 70.7/100V speaker lines via phoenix connector and additional features include status LEDs, Removable Level Controls with set it and forget it security cover, and a global (100VAC-240VAC) power supply. The PA series of amplifiers are part of a new line from Atlas Sound that are designed from the ground up and include the important features professional installation personnel require to meet or exceed their customer's expectations.

Owners Manual
Data Sheet
Part Number: A-PA60G

Features
  • One Balanced Mic/Line/Tel Input w/Phantom Power
  • 2 Unbalanced, Summing Line Level Inputs
  • Variable VOX Mute Sensitivity Control for Input 1
  • Contact Closure Mute Terminals
  • Global Power Supply, 100VAC-240VAC ~ 50/60Hz
  • Compact 1RU, 1/2 Rack
  • One Balanced Line Input
  • One Unbalanced, Summing Line Level Input
Dimensions: Height: 1.75" (44mm) 1RU
Width: 8.5" (216mm)
Depth: 7.81" (198mm)
Power Output: 60 Watts @ 70.7 (83^)
60 Watts @ 100V (166^)
Frequency Response: 50 Hz. - 20 kHz. (+/-3 dB)
Sensitivity: Line: 500mV (600^)
RCA: 500mV (10k^)
S/N Ratio: Line: >55dB
RCA: >55dB
Indicator LEDs: Power, Signal, Limit
Idle Power Consumption: 0.075 A, 8 Watts, 27 BTU
Average Power Consumption: 0.41 A, 34 Watts, 116 BTU
Max Power Consumption: 1.25 A, 102 Watts, 348 BTU
Weight: Net: 2.9lbs (1.32kg)
Ship: 3.1lbs (1.4kg)
Small and compact, and engineered for reliability, the Atlas Sound MA40G amplifier is the perfect choice for distributed business paging and background music (BGM) systems, and small to medium speech privacy systems. It provides 40W into a 70.7V/100V line and has three total inputs including a balanced mic/line input featuring phantom power and variable mute sensitivity control as well as two unbalanced, summing line level inputs. Additional features include Removable Level Controls with set it and forget it security cover, contact closure mute terminals, and a global (100VAC-240VAC) power supply. The MA series of amplifiers are part of a new line from Atlas Sound that are designed from the ground up and include the important features professional installation personnel require to meet or exceed their customer's expectations.

Owners Manual
Data Sheet
Part Number: A-MA40G

Features
  • One Balanced Mic/Line/Tel Input w/Phantom Power
  • 2 Unbalanced, Summing Line Level Inputs
  • Variable VOX Mute Sensitivity Control for Input 1
  • Contact Closure Mute Terminals
  • Global Power Supply, 100VAC-240VAC ~ 50/60Hz
  • Compact 1RU, 1/2 Ra
Dimensions: Height: 1.75" (44mm), 1 RU
Width: 8.5" (216mm)
Depth: 7.81" (198mm)
Power Output: 40 Watts @ 70.7V (125^)
40 Watts @ 100V (250^)
Frequency Response: 50Hz - 20kHz
THD+N: <5% @ 1kHz, Rated Output
Sensitivity: Mic Input: 0.316~3.16mV (-50 ~ -30dBV)
Line Input: 500mV (600^)
RCA Inputs: 500mV (10k^)
Output Regulation: <2dB, No Load To Full Load
S/N Ratio: Mic: >55dB
Line: >55dB
RCA: >55dB
Indicator LEDs: Power, Signal, Limit
Idle Power Consumption: 0.075 A, 8 Watts, 27 BTU
Average Power Consumption: 0.26 A, 24 Watts, 81 BTU
Max Power Consumption: 0.8 A, 71 Watts, 242 BTU
Weight: Net: 2.9lbs (1.32kg)
Ship: 3.1lbs (1.4kg)